100w High Torque DC Planetary Reduction Gear Motor 12v 24v

J-SZ(ZYT)PX Micro DC Gear Motor

The PX series planetary gear reduction motor consists of the SZ (ZYT) series DC motor and the PX type standard precision planetary reducer. It comes with a power supply and enables stepless speed regulation. With a wide adjustment range, small size, light weight, high efficiency, compact structure, and high output torque, it is widely used in drive devices that require low-speed high torque and stepless speed regulation. When the motor is equipped with a speed controller, it can achieve continuous speed variation from 0 to the rated speed. The PX series planetary gear reducer can be directly connected to various motors such as AC motors and stepper motors. It can also be directly connected to worm gear reducers and cycloidal pinwheel reducers to form reducers with different speed ratios or large speed ratios

PX Series General Speed Ratios

First stage: 4, 6

Second stage: 16, 24, 36

Third stage: 64, 96, 144, 216

Fourth stage: 256, 384, 576, 864, 1296

90PX Series Non-standard Speed Ratios - Level: 3

Second stage: 9, 12, 18

Third stage: 27, 48, 54, 72, 108

Fourth stage: 81, 162, 192, 288, 324, 432, 648

110PX Series Non-standard Speed Ratios - First stage: 5

Second stage: 20, 25, 30

Third stage: 80, 100, 120, 125, 150, 180

Fourth stage: 320, 400, 480, 500, 600, 625, 720, 750, 900, 1080

Customizable gearboxes with special speed ratios, rotational speed, installation dimensions, and other non-standard specifications.

Selection Example

Users can correctly select the power and model of the gearbox based on the actual working conditions and load characteristics, referring to the following information.

Planetary Gear Parameter

Power: 20W~2000W

Voltage: 12, 24, 36V, 48V, 90V, 110V, 180V, 220V (Accept other voltage)

Speed:1500r/min   3000r/min  6000r/min(55, 70)

Install type: A1 foot mounted. A3 flange mounted, A2 foot with flange

Overall diameter(mm)：55, 70, 90, 11, 130

Electric motor parameter

Size: 32mm 36mm 38mm 42mm 52mm 57mm 60mm 63mm 70mm 76mm 80mm 90mm 110mm

Rated voltage : 10v 12v 18v 24v 36v 48v upto 380vdc

Rated torque : upto 3Nm (calculated without gearbox)

Rated speed: upto 15000rpm 

Rated power: upto 1000w

Protection class IP 40 50 54  56 66 67 Option

BELOW ARE ONLY TYPICAL MODELS, PLS CONTACT US FOR CUSTOMIZED MOTORS

These are standard shafts of our company above. The diameter of the output shaft can be 6mm, 8mm, 10mm, 12mm, 14mm and so on.We can design and manufacture the shafts according to your demand.

The parameters of the motor above are for your reference.We can design and manufacture according to your required like voltage, power,speed,torque and dimensions.